At Schuberth’s Formula 1 helmet factory in Schio, northern Italy, a carbon-fibre shell can take up to six hours to mould by hand before it is baked, cut and assembled. A BBC Sport factory visit details the exacting work behind equipment designed to protect drivers from impacts, debris and fire while keeping weight low.

The German manufacturer’s team hand-makes about 250 helmets a year, according to reporting by BBC journalist Inga Stracke. Its customers include four-time world champion Max Verstappen.

“Our philosophy is to make the best product for the best drivers,” Schuberth Performance chief executive Alberto Dall’Oglio told the BBC.

Production begins with a carbon-fibre blend stored at precisely minus 16 C. An engineer moulds the material layer by layer before the unit is baked in a vacuum bag at 120 C for three-and-a-half hours.

The tolerances leave little room for error. Dall’Oglio said even a tiny structural or surface defect means a shell cannot be used, potentially wasting more than 1,000 euros in material as well as hours of labour.

A water-jet cutter operating at 4,000 bars of pressure creates the visor opening without applying mechanical cutting force to the shell. Assembly adds roughly another 100 components to an outer shell already made from nearly 100 pieces, depending on the aerodynamic specification.

The finished equipment combines ventilation, fire-resistant linings, communications equipment, a drinking system and retention mechanisms. According to the BBC report, current F1 helmets must withstand a 225-gram metal projectile fired at 155 mph, exposure to a 790 C flame, and substantial impact and crushing tests.

Weight remains a competing concern. Dall’Oglio said a helmet weighs about 1.4 kilograms, depending on its decoration and aerodynamic specification. Engineers may work to remove 20 or 30 grams, only for a driver’s paint scheme to add 70 or 80 grams.

Protection also depends on preparation at the circuit. Schuberth’s racing service technician Sven travels to prepare helmets and visors for rain, sunshine or floodlights, carrying the helmets to avoid impacts in transit.

Dall’Oglio said the company regularly repeats tests and exchanges information with motorsport governing body the FIA, including work on future helmet regulations.

Source: BBC Sport’s factory report by Inga Stracke.

Sources